For my vehicle
Snowblowers for ATV
You are here : Products - Snowblowers - Snowblowers for ATV


54" Model - # 700582-2


Put this snowblower on your ATV or your side by side UTV, it fits them all. Its 54'' size and the fact that it hooks on & off in under 4 minutes will cut down your snow removal time to a fraction of the time it used to take. Take a seat and let the snowblower go through the snow banks with ease. You'll want it to snow so you can go outside and play.

Find a dealer
Product Warranty
(23 Ko)

Warranty Application

Picture of the vehicle is for reference purpose only, vehicle may differ. Product may differ slightly from image.

Requires Requires:

  • Offered with or without a motor.
  • Winch to lift accessory (1000 lbs & more)
  • Rear ball hitch (2'')
  • Please verify measurements of vehicle to ensure proper fit and if optional extension kit for subframe is required.

    If the measurement from front of bumper to the rear ball hitch is longer than 106" you will need the subframe extension kit #700485.
Innovation Transfer of power

  • Electromagnetic clutch to start the snowblower instantly.


  • A unique Type B belt system assuring reliability and longer life span. Belt tensioner allows changing the belt within 5 minutes, 7/16'' wrench is required to remove the belt guard.


  • In order to offer better manoeuvrability when the ground is not frozen, the weight of the snowblower can be transferred to the vehicle's suspension therefore avoiding that the wheels sink in to the ground.
Durability HEAVY DUTY Gear Box

  • Assures performance in any type of snow removal and requires no maintenance.

Shear Bolts

  • Equipped with shear bolts which is a preventive measure to reduce the risk of damage when a solid object is picked up but vigilance on the part of the operator is your best assurance against accidents or damage.

Endurance It's double layered base along with other reinforcements will help reduce damage if an obstacle is hit.
Performance Offer with a 20 HP Honda.

  • Berco TWO STAGE Performance

    • 1ST STAGE

      Is the powerful saw tooth auger which breaks through any type of snow with ease.

    • 2ND STAGE

      Is the impeller that turns at a high RPM which propels the snow to further distances.

  • Installation

    • No more wasted time! This beauty attaches within MINUTES on most major brands of ATVs or UTVs.

    • The mounting system goes underneath the ATV or UTV and goes all the way to the rear to hook up on the tow hitch. It is adjustable for different lengths of ATVs or UTVs. At the front it hooks up to the front axles with some chains. It's that simple and quick.

    • ATV or UTV must be equipped with a winch to lift snowblower.

    Benefits Controls at your fingertips

    • Fingertip controls for the snowblower:

    • Pull the red button to start the snowblower;

    • Use the joystick to turn the chute and to adjust the deflector;

    • Push the red button to stop the motor and snowblower.


  • 20HP "Honda" engine, centrally placed for perfect balance.
  • You also have the possibility to have a Berco dealer install a engine of your choice according to your needs.

  • Recommended : 13 to 23 Hp engines with a 1'' shaft.

  • Adjustable Frame

    • 4.75'' wide frame is adjustable to different lengths: from 73'' to 112''.

    Universal mounting

    • Can be installed on most major brands of A.T.V. in less than 4 minutes.
    • Uses chains with straps or brackets to hook up to the front axle and attaches on to the rear tow hitch ball.

    Electric lift

    • Uses the vehicle's winch (not included).

    Dolly wheel

    • Dolly wheel frame supports the weight of the snowblower so there is no added weight to the vehicle.

    Back to the list

    © 2017 Bercomac Limitée Send it to a friend Print this page

    Bercomac Limitée
    92, Fortin Nord
    Adstock (Quebec, Canada)
    G0N 1S0

    Print date : January 2017 22
    Phone : (877) 772-3726
    Fax : (800) 430-2252
    E-mail :
    Website :